GT-10-20A3 Mill-Turn Static Driven Live Tool Model with Three Axial ER-20 Spindles
Click to Enlarge
GT-10_2017 GT-15-239 GT-10-238 GT-ISL-45-62 Accessories-336 LiveToolSpindles-130
GT-10-20A3 Mill-Turn Static Driven Live Tool Model with Three Axial ER-20 Spindles
GT-10-20A3 Mill-Turn Static Driven Live Tool Model with Three Axial ER-20 Spindles
Year: New
Location: Santa Ana, CA
Price : US$60,995.00
Status: New
Manufacturer: CNC New, Inc.
More Information
Single Piece Casting, Gang Tool CNC Lathe with 4,500 RPM Spindle, 1-3/4" Bar Capacity, Hydraulic Collet Closer, GSK CNC Motors and Drives, 10HP C-Axis High Performance Servo Spindle Motor & Drive, This model includes three ER-20 spindles mounted in the axial direction and driven by a 1kw, or 1.5hp motor with rated torque of 3.2Nm servomotor. The CNC control is 5-Axis capable. We use X, Z and C-axis on the lathe and have two additional axis’s to program the live tool spindles that can perform tapping and other milling operations.
Capacities SAE METRIC
Max Turning Diameter 14.1 in 360 mm
Max Swing Over Table 5.1 in 130 mm
Bar Capacity 1.77 in 45 mm
Travels & Feedrate SAE METRIC
Max. X-Axis Travel 17.5 in 444 mm
Max. Z-Axis Travel 13 in 330 mm
Rapid on X-Axis 590 in/min 15 m/mm
Rapid on Z-Axis 787 in/min 20 m/mm
Axis Max Feed Rate 400 in/min 10.15 m/min
Power Rating 10Hp (7.5kw)
RPM 15-4500 rpm
Spindle Bore 2.21 in 56 mm
Drawtube Bore 1.77 in 45 mm
Spindle Nose A2-5
Collet Actuator Hydraulic Cylinder(Opt Pneumatic)
Integral Casting One Piece Construction,Slant Angle 45 degree
Rail Span 17.32 in 440 mm
Casting Weight 3300 lbs 1,500kgs
Linear Rails X/Z 1.81 in 30 mm P Accuracy
Ball Screws Precision X/Z Ground 1.26 in 32 mm C3 Accuracy
Auto Lubrication Linear Rails and Ball screws
Head Stock Cast Iron
Turret Working Holding SAE METRIC
Gang Turret Table HT. 2.756 in 70 mm
Table Length T-Slot 24.41 in 620 mm
Chuck Size 6 inch
Collet Nose Options A2-5
Center Height Holders 3/8, 1/2, 3/4 in Custom Blocks
Precision SAE METRIC
Positional Repeatability +/- 0.0001 (one tenth) / +/- 0.00254 mm
Positional Resolution +/- 0.00005 (50 millionths) / +/- 0.00127 mm
Positional Accuracy +/- 0.0001 (one tenth) / +/- 0.00254 mm
Spindle Runout +/- 0.00005(50millionths) / +/- 0.00127 mm
C-Axis Indexing Increment 0.001 deg. 360k Radial Pos.
Requirements SAE METRIC
Coolant Capacity 18.5 gal 70 lit
Coolant Pump 3/4 hp 0.5 kw
Compressed Air 5 SCFM(Clean,Dry Air) Live tools
Power Required 16 KVA 42 amps
Voltage 208-240 VAC 3-Phase
Machine Dimensions SAE METRIC
Floor Space L X W 68X35 in 1730X890 mm
Machine Height 63.0 in 1600 mm
Sheet Metal Length 87.4 in 2220 mm
Sheet Metal Width 56.6 in 1438 mm
Machine Weight 4,500 lbs 2,045 kg
CNC New, Inc. 1516 E. Edinger Ave. B & C Santa Ana, CA 92705
Phone: 1-800-662-3351 or 1-949-218-4393 Fax: 1-949-388-5615
copyright CNCNEW Inc. All rights reserved